IQRF Gateway Daemon
Software tool that allows to turn UP board, Raspberry Pi or any Linux computer into an IQRF gateway
- Category
- Development
- Status
- Available
- Manufacturing location
- Czech Republic
IQRF Gateway Daemon allows you to make your Linux computer the IQRF gateway which can serve to control the IQRF wireless network. Part of the step-by-step guide there is also a Node-RED web application to allow you control the network from a user-friendly interface by sending DPA commands in JSON format.
Open source software to implement IQRF gateways from Linux devices
A powerful IQRF gateway can easily be implemented with any general purpose Linux-based microcomputer like Raspberry Pi.
IQRF Gateway Daemon is a package allowing to easily create an IQRF gateway with Internet and cloud connectivity from embedded Linux devices (Raspberry Pi, Up Board, PlugPC, BeagleBone, ...). The Daemon utilizes multiple communication channels UDP, MQ and MQTT.
Marketplace
Other products
Development
IQRF Transceivers
IQRF transceivers are basic element of the IQRF wireless mesh network
IQRF Tech s.r.o.
IQRF InteroperableDevelopment
DS-START-04
IQRF Development set "START" - 3 devices
IQRF Tech s.r.o.
IQRF InteroperableDevelopment
DS-IOT-01
Sensor and relay kit to quickly start your own IQRF mesh network
IQRF Tech s.r.o.
Development
IQRF click
IQRF click carries the DCTR-76DA RF transceiver, operating in the 868/916 MHz frequency. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI or UART interface, with additional functionality provided by the following pins on the mikroBUS™ line: AN, RST, PWM, INT.
MikroElektronika D.O.O.